  Ultimate Hard Drive Cooler
Ultimate Hard Drive Cooler fits in your 5 1/4 inch slot. Ultimate Hard Drive Cooler uses a large heatsink to dissipate heat from your hard drive. Air flows through the through the heatsink using two 40x40x20mm ball bearing fans. Spring loaded heatsink allows the heatsink to sit flush against the top of your drive. This is a perfect solution for high RPM hard drives.(For standard height drives only)
WARNING:
The Ultimate Hard Drive Cooler has been known to be incompatible with some cases. As you see in the picture the face plate does not mount to the rails. Your case rail must have enough room to fit both the screws for the face plate and the screws for the rail unit. If not your would have to drill a second hole in your case. We do not warranty items to be compatible with your case. Please double check your case before ordering this item.
Specification:
- Dual 40X40X20mm Ball Bearing fans
- 5000 RPM for each fan
- 13 CFM
- 26 DB
- 0.72 Watt Power consumption, 12VDC
- Dim. 110 x 101 x 12.2
- Shipping Weight 1.5lbs
|
Our Advice:
This is a must if you are running any of the newer drives.
Pros:
Brings air into your case for cooling
Extends life of hard drive
Installs easy
Supports all drives because of spring loaded heatsink
Cons:
Costs a little more than bottom mount coolers
|
